Running Pidora on RaspberryPi

Last week I started to play with my RaspberryPi (thanks @dani_viga). It seems simple and funny. I’d like to run an Hadoop cluster like LinkedIn or others geeks but first of all I need to setup the system.

My RaspberryPi kit includes the board, an USB-microUSB cable (as power supply), an SD card (16 GB) and an ethernet cable.


pidora_logoAs Linux distribution I choose Pidora because I like CentOS and this a Fedora/RedHat-like distribution. Base image can be downloaded from official page. Then you have to burn the image on the SD card. It seems that RaspberryPi can boot only from SD card. I can’t find any guide to boot it from USB key without SD card. Anyway is possible to use it as main drive. To burn it on SD on Mac o Linux you can use dd

dd if=/path/to/image/pidora-18-r1c/pidora-18-r1c.img of=/dev/disk3 bs=1m

First parameter is the path of the downloaded image, the second one is the endpoint of the SD drive (you can find it using diskutil list).

After this I simply plugged USB to my Mac and ethernet to a connection. After a dozen of seconds lights start blinking!


System is already configured and on port 22 runs SSHd. If you try to connect to the IP using root as username and raspberrypi as password the RPi answers!


Next week I’ll try to install a LEMP stack on it. FUN! 😀